Painstaking Lessons Of Info About How To Clean An Iac

Hi all, i clean the idle air control (iac) on my 2005 ultra when it starts to idle too low.

How to clean an iac. I did this last week and i had a. The first step is to test the electrical wiring that connects to the idle air control. Remove the filter box and the air duct;

Detach any wires coming from the valve so you can remove it completely. Unscrew the idle air control valve by removing the screws that hold it to the throttle body. The part can be cleaned by either removing it from the throttle body or in place.

How do i test an idle air control valve with a multimeter? Yes, you can clean the idle air control valve. Locate the idle air control valve;

Next, use a brake cleaner and spray it on the. Very carefully, use an ear swab soaked in carb/injector cleaner and wipe this slot out inside. Let the area dry for at least 30 minutes.

Cleaning it usually helps restore the idle rpm to 900 or so. Use the cleaner and a towel or rag to clean the outside of the throttle body and the inside of the idle air control valve passages. Just before the iac port hole in the tb, you will find a thin slotted hole below it.

It's important to use a very low psi air pressure when. Andy phillips shows how to clean the idle air control (iac) valve using carburetor cleaner.disclaimer:the individual featured on the phillips vision youtube. You must be careful with the cleaning products.